4. With the increasing amount of homopolymer, the PEO domain size increases.
随着均聚物含量的增加，PEO分散相尺寸逐渐增大；
youdao
5. The homopolymer and the copolymer of acrylic acid and acrylamide is very useful and important.
丙烯酸、丙烯酰胺的均聚物和共聚物用途广泛，是一类非常重要的高分子化合物。
youdao
6. Furthermore, the phase domain structures are different at different concentrations of homopolymer a and B.
此外，如果均聚物a和B的浓度不同，其相区的结构也不同。
youdao
7. The process of thermal-decomposition of indole homopolymer is studied, and the superior conditions are obtained.
研究了酸聚物的热分解过程，得到了酸聚物热分解的适宜条件。
youdao
8. The distribution of star homopolymer within the microphases was investigated based on enthalpic and entropic effects.
并结合体系的熵和相互作用能的变化， 讨论了星型均聚物在体系微相结构中的分布。
youdao
9. The fluoro-acrylate was homopolymer-ized and copolymerized in emulsion at present of a composite emulsifying agent, respectively.
含氟丙烯酸酯在复合乳化剂存在下分别进行均聚乳液聚合和共聚乳液聚合。
youdao
10. PHB copolymers are preferred for general purposes as the degradation rate of PHB homopolymer is high at its normal melt processing temperature.
基丁酸酯共聚物是作为均聚物PHB的降解率一般用途的首选是在其正常高熔体加工温度。
youdao
11. The simplest polymer which can be envisaged consists of the repetition of a single structural unit many times over to form a liner homopolymer.
可以想象，最简单的聚合物是由一种结构物单元重复多次形成一个 线型 均聚物。
youdao
12. Its unique crystalline structure results in increased strength, stiffness, heat distortion temperature and performance under load as a homopolymer.
其独特的，增加了强度，刚度晶体结构的结果，热变形温度和负荷下表现为均聚物。
youdao
13. Blending modified PP for accumulator was developed by extrusion blending, with PP homopolymer as basic material, PP copolymer, HDPE and SBS as modifiers.
14. The experimental results show that the changes of melt peaks of copolyesters with changing of S. S. P. temperature and time are different from PET homopolymer.
研究发现，共聚酯的熔融峰随着固相聚合温度和时间的变化而与纯PET有明显的差别；
youdao
15. Through the study on every step structure of corn starch graft polyacrylate copolymer, the methods of removing homopolymer and corn starch side chain are discussed.
研究玉米淀粉接枝聚丙烯酸酯共聚物的各级结构，主要探讨去除均聚物和玉米淀粉侧链的方法。
youdao
16. Compared with homopolymer GAP, THF copolymer GAP has more excellent mechanical performances and less sensitivity, and possesses the same degree of thermal stability.
17. The production technique of polyoxymethylene can be divided into homopolymer technique and copolymer technique. In this project, copolymer technique will be applied.
聚甲醛生产工艺有均聚甲醛和共聚甲醛两种，本项目拟采用共聚甲醛工艺技术。
youdao
18. The PHB homopolymer is a stiff and rather brittle polymer of high crystallinity, whose mechanical properties are not unlike those of polystyrene, though it is less brittle.
在PHB的均聚物是一种高结晶度，其不同于那些不聚苯乙烯力学性能，比较脆硬聚合物，虽然它是那么脆弱。
youdao
19. Five-selection simple cubic lattice, self-avoiding walk, and nearest interaction model were used to construct the homopolymer adsorption model on the solid-liquid interface.
模拟中采用五选择简单立方格子上的自回避行走和最近邻相互作用模型；
youdao
20. When the mass fraction of the homopolymer in blends reaches 33.3%, the "core-shell" structure, similar to the micelles, can be clearly observed in the polystyrene (PS) matrix.
当均聚物质量分数增大到33.3%时，在聚苯乙烯（PS）连续相中形成了类似胶束的“核-壳”结构。
youdao
21. The Conditions for formation of IPN from castor oil polyurethane and homopolymer or copolymer of styrene, methylmethacrylate and acrylonitrile at room temperature were Studied.
22. The test and study results indicate that DR of copolymer is better than homopolymer with same molecular weight and DR of homopolymer with same molecular weight decreases as len…
23. Diaceton acrylamide is mainly used as homopolymer and is a good modifier as well, it has a broad range of USES such as in coatings, cohesive agents, hair spray, light-sensitive materials.
24. This paper compares the performance levels of selected GMS materials as antistat and mould release agents in homopolymer and random and impact copolymer PP injection moulding applications.
25. A nonwoven web formed of substantially continuous spunmelt fibers is formed from a homopolymer of polypropylene having a skewed molecular weight distribution and a polydispersity of less than 3.5.
26. A nonwoven web formed of substantially continuous spunmelt fibers is formed from a homopolymer of polypropylene having a skewed molecular weight distribution and a polydispersity of less than 3.5.
The PMMA-b-PAAM showed a better thermal stability than PMMA homopolymer. 所得产物具有嵌段共聚物的特征，其热稳定性优于聚甲基丙烯酸甲酯均聚物。
The chromatogram of the whole sample is resolved into two peaks cor-responding to homopolymer and block copolymer by peak resolution technique. 原试样的实验谱图用解叠方法得到共聚物和均聚物的两个组成峰。
