annealing
英[ə'niːlɪŋ]
美[ə'niːlɪŋ]
-
n.
低温退火；锻烧；热处理
-
动词anneal的现在分词形式.
Noun:
-
hardening something by heat treatment
- 1. The reducing annealing furnace is adopted.
- 采用无氧化还原退火炉。
youdao
- 2. Tension control in annealing demand is very high.
- 张力的调节在退火方面要求是相当高的。
youdao
- 3. Automatic pressure relief during annealing process.
- 在退火过程中自动进行泄压。
youdao
- 4. Annealing also relieves internal stresses previously set up in the metal.
- 退火也释放了先前在金属中的内应力。
youdao
- 5. Surfaces in contact with the fluid shall be free from scale and annealing colours.
- 与流体接触的材料表面不得有刻痕和退火变色。
youdao
- 6. A method of image restoration based on PSO and simulated annealing algorithm is proposed.
- 提出了基于微粒群和模拟退火算法的图像复原算法。
youdao
- 7. Annealing voltage is freely adjustable and Annealing time can be set from 0 to 10 minutes.
- 退火电压可进行无级调节，退火时间从0到10分钟任意可调。
youdao
- 8. So the simulated annealing algorithm is introduced to solving the material balance equation.
- 因此，本文引入模拟退火算法求解物质平衡方程。
youdao
- 9. There are three main operations in the heat treatment of steel: hardening tempering and annealing.
- 钢的热处理操作主要有三种，即：淬火、回火和退火。
youdao
- 10. The procedures of heat treatment of steel include hardening tempering annealing and case hardening.
- 钢的热处理工序包括硬化、回火、退火和表面硬化。
youdao
- 11. There are three main operations in the heat treatment of steel: hardening, tempering and annealing.
- 钢的热处理操作主要有三种，即：淬火，回火和退火。
youdao
- 12. The application of quartz ceramics roll in silicon steel continuous annealing furnace was introduced.
- 本文介绍了石英陶瓷辊在硅钢连续退火炉中的应用情况。
youdao
- 13. When the term "annealing" is applied to ferrous alloys without qualification, full annealing is implied.
- 当“退火”这个术语用于铁类合金而又无其他限制条件时，指的是完全退火。
youdao
- 14. According to phenomenon, combined with annealing principle to explain and solve operational some mistakes.
- 现根据现象，结合退火原理来解释、解决操作上的一些失误。
youdao
- 15. But in the continuous annealing, copper wire heating make wire become soft, line itself has certain extension.
- 但是在连续退火时，铜线发热使线材变软，线本身就有一定的延伸。
youdao
- 16. When the annealing temperature has been reached, the steel should be held there until it is uniform throughout.
- 达到退火温度后，钢应当保持在此温度等到全部均匀受热。
youdao
- 17. We develop a fringing state space model used in the continuous annealing furnace computer optimization control.
- 本文开发了一个用于连续退火炉计算机优化控制的离散状态空间模型。
youdao
- 18. General continuous annealing export should choose to die than actual need wire diameter 0.0015-0.0035 more appropriate.
- 一般连续退火出口模要选择比实际需要线径大0.0015—0.0035比较合适。
youdao
- 19. Through various drawing methods and annealing steps, We produces different physical characteristics in wire of a given size.
- 通过各种绘图方法和退火步骤，我们产生不同的物理特性，在一个给定大小的丝。
youdao
- 20. The most aim is to found the rule of carbon effects oxygen deposition and the change of minor carrier lifetime in annealing.
- 其主要目的是通过不同温度的热处理，发现碳对氧沉淀影响的规律，以及热处理过程中硅片样品少子寿命的变化。
youdao
- 21. And this annealing phenomenon could potentially allow you to get ten more years of operating life and then allow you to re-radiate.
- 热处理的现象可能,使你们得到十几年的十来来运作,然后能够让你们重新辐射。
youdao
- 22. The effects of annealing on the activity of al alloy anode were studied by measurement of polarization curves and analysis of SEM.
- 采用极化曲线测试结合扫描电子显微镜分析技术，研究了退火对铝合金阳极的活性的影响。
youdao
- 23. By drying and annealing the material, the scientists mainly remove weakly bound water to make the ceramic fibres form a denser structure.
- 通过对材料进行干燥和退火处理，科学家们移去了弱的结合水以使陶瓷纤维形成致密结构。
youdao
- 24. In 2005, a postdoctoral researcher in his laboratory developed a water annealing process, reconstituting the silks slowly in a humid environment.
- 2005年，他实验室的一位博士后研究员利用一种水退火过程在潮湿环境下对丝类进行了缓慢的重组。
youdao
- 25. By warm rolling after hot rolling or cold rolling after annealing in process and stabilizing annealing in some temperature condition, the c.
- 采用热轧后温轧或中间退火后冷轧，再在一定温度下进行稳定化退火的工艺，可以获得综合性能良好的铝-镁-钪合金冷轧板材。
youdao
- 26. By warm rolling after hot rolling or cold rolling after annealing in process and stabilizing annealing in some temperature condition, the c.
- 采用热轧后温轧或中间退火后冷轧，再在一定温度下进行稳定化退火的工艺，可以获得综合性能良好的铝-镁-钪合金冷轧板材。
youdao
用作名词 (n.)
- Implantation damage can be removed by annealing, i.e. heating in flowing gas.
注入损伤可以通过退火，即在流动空气中热处理来消除。
- This paper attempts to review the effect on FZ monocrystalline silicon by annealing.
阐述了热处理对辐照区熔硅单晶的影响。
